va-Q-vip F-EPS

Characteristics

va-Q-vip F-EPS is a vacuum insulation panel with EPS lamination for construction applications.
The core itself is non-combustible (fire class A1), va-Q-vip F-EPS is inflammable (construction materials class DIN 4102-B2).
va-Q-vip F is approved for general construction purposes in accordance with approval number Z-23.11-1658, of the "Deutsches Institut für Bautechnik (DIBT)". On July 1st 2015 the validity of the approval was extended until June 30th 2020.
va-Q-vip F-EPS elements stand out because of their smooth edges and corners. This is due to the special edge folding technique "va-Q-seam". Individual elements can therefore be joined together almost seamlessly.

Applications

va-Q-vip F-EPS can be used in buildings in areas like interior applications for ceilings, walls, floors, flat roofs, top floor ceilings, exterior insulation behind panelling or insulation in wood frame construction to the standard DIN 4108-10, Table 1. Developers, installation partners or architects should supervise the relevant specific insulation system. Application systems for buildings can also be discussed directly with va-Q-tec.

Advantages

  • Official approval for building material with assigned thermal conductivity 0.007 W/mK
  • Significantly reduced heat flows and thickness
  • Saves space, providing larger usable area
  • Extra protective layer for reliable installation

PER_E-MAIL_EMPFEHLEN

Product Data

  • Surface color: Silver/white
  • Outer appearance: Rectangular shape (without protruding flanges*)
  • Density (raw panel DIN EN 1602): 180 to 210 kg/m³ for > 10 mm, 180 to 250 kg/m³ for ≤ 10 mm
  • Thermal conductivity - initial value: < 0.0043 W/(mK) at 20 mm thickness (measured value)
  • Thermal conductivity - rated value including aging, edge losses: 0.0070 W/(mK) by more than 20 mm thickness, 0.0080 W/(mk) at 10-15 mm thickness (measured value)
  • Thermal conductivity - with ventilation: 0.020 W/(mK)
  • Temperature stability: -70 °C to +80 °C, temporarily 120 °C for 30 min.
  • Thermal shock resistance: Not sensitive to heat & cold shock within given temperature range
  • Humidity stability: 0 % to 70 %
  • Internal gas pressure: < 5 mbar (at delivery)
  • Increase of gas pressure: approx. 1 mbar/year (at 20 mm thickness & normal room conditions)
  • Standard dimensions (L x W) I & II: I: 1000 mm x 600 mm, II: 500 mm x 600 mm
  • Special shapes: Triangle, trapezium, special shapes, cornet cut, hole cut and recessed surface
  • Thickness: 10 mm to 50 mm
  • Length tolerance:
    • 0 to 500 mm: +2 / -4 mm
    • 501 to 1000 mm: +2 / -5 mm
  • Thickness tolerance: ± 5%
  • Spec. heat capacity powder plate: 0.8 kJ/(kg·K) (at normal room temperature)
  • U-value initial value: 0.22 W/(m²K) (at 20 mm thickness)
  • U-value - rated value including aging, edge losses: 0.35 W/(m²K) (measured value) at 20 mm thickness
  • Mass per area: 3,5 - 5 kg/m² (for 20 mm thickness)
  • Compressive strength: approx. 150 kPa (at 10% compression)
  • Service life: extrapolated, depending on application up to 60 years
  • Flammability: DIN 4102-B2
  • Lamination: Lamination with extruded polystyrene on one side or double sided
  • Hint:

    * For 10 mm and 15 mm thickness, if a flat edge is required, the flanges are refolded onto the main surface of panel.

    Thickness of lamination: 10 mm

    Thermal conductivity at 10 mm thickness: 0,040 W/(mK)