Product data sheetva-Q-pur
Characteristics | |
va-Q-pur's core material is a special polyurethane foam with 100% open cell, which exclusive delivered to va-Q-tec. Due to the rigid and light weight va-Q-pur is can be used various application fields such as transport containers. The PUR core is wrapped in a highly almost impermeable barrier film and evacuated with very low gas pressure in a chamber and sealed. The aluminum barrier film ensures that the va-Q-pur keeps the necessary vacuum level for a desired period. In general, va-Q-pur is produced a rectangular shape in accordance with the va-Q-seam technique. va-Q-pur also can be produced in recessed surfaces. Other shapes are available on request. |  |
Applications | |
va-Q-pur is especially developed for applications e.g. appliances like freezers and refrigerators or thermal transport packaging. Especially va-Q-pur is fitted together with conventional polyurethane foam systems. The high temperature during the foaming process does not influence the thermal or mechanical properties of the va-Q-pur by appliance applications. The adhesion between the surface of the va-Q-pur and the polyurethane foam is very good. Please discuss your application with va-Q-tec AG. |  |
Advantage
- Flat and hard surface
- Light weight
- Surface indentation is possible
Product data
| Surface color | Silver |
| Geometry | Rectanguler shape without flanges |
| Density | 65 kg/m³ |
| Thermal conductivity | 0.007 to 0.009 W/(mK) |
| Temperature stability | -70 °C to +60 °C |
| Thermal shcok resistance | Not sensitive to heat & cold shock in the given temperature range |
| Humidity stability | 0 % to 60 % |
| Internal gas pressure | < 1 mbar (at delivery) |
| Maximum dimension (L x W) | 1200 mm x 1000 mm |
| Thickness | 10 mm to 40 mm |
| Size tolerance | |
| • 0 to 500 mm | ± 3 mm |
| • 501 to 1000 mm | ± 5 mm |
| • 1001 to 1300 mm | ± 7 mm |
| Thickness tolerance | ± 1.5 mm |
| U-value | 0.27 W/(m²K) (at 30 mm thickness) |
| Mass per area | 1.75 kg/m² (at 30 mm thickness) |
| Compressive strength | approx. 250 kPa (at 10% compression) |
| Service life | up to 15 years (depends on film and application) |
* For 10 mm and 15 mm thicknesses, if a flat edge is required, the flanges are refolded onto the main surface of panel.
All figures are intended as a guide and should not be used for preparing specifications.
All figures are intended as a guide and should not be used for preparing specifications.